Solutions · Multimodal sensing
Find the faults a single sensor misses.
A crack shows in the image, an overheating contact in thermal, a bearing fault in the vibration. With one sensor you only see part of the process.
What each modality sees
Five senses for one machine.
01VisionSurface defects, position, completeness, motion
02ThermalHotspots, heat distribution, overheating joints
03DepthGeometry, distance, fill level and volume
04Sound & ultrasoundSpatter, cracks, leaks, friction
05VibrationBearing faults, imbalance, looseness, wear
How you put it to work
Start with what your task needs today and extend later. The Edge AI Hub takes in the streams and time-stamps each one, on site.
- One hub as the base, one node per function
- Add nodes when new questions come up
- Mounted on column, frame or housing, without touching the controller
- Every sensor reports its own signal problems and dropouts
Recommended setup
Multi-Modal Sensing Kit
Depth, vision, thermal, sound and ultrasound, vibration and events in one system. For a smaller start there is the Starter Kit.
Next step
Which modalities does your process need?
Describe the fault you want to find. We tell you which sensors can see it.